BELAIDĖS SISTEMOS KONTROLERIS SMART-HUB-PLUS BE WAVE SATEL

The SMART-HUB-PLUS controller is the main device of the BE WAVE system. Enables a wide range of system functions, both automation and security related. The SMART-HUB-PLUS manages the operation of all BE WAVE system devices, which can be connected up to 128 in a single installation.

The BE WAVE application is dedicated to management. Simple and intuitive menu makes the system operations simple and obvious. The free BE WAVE application will send a notification to your phone when the sensors detect an event, and you have control of the device at any time, no matter where you are - all you need is Internet access and a smartphone. In the event of an Internet outage, SMART-HUB-PLUS can also operate in the local mode, in which case it will broadcast the WiFi you need to connect to in order to control your system. The SMART-HUB-PLUS controller is additionally equipped with a telephone module, so that it can also communicate via 2G, 4G mobile networks in case of lack of access to Internet infrastructure. Slots for 2 SIM cards allow you to fit cards from 2 different operators (automatic switching when the signal of one of the networks is lost).

The SMART-HUB-PLUS built-in wireless system controller uses proven ABAX 2 technology to communicate between devices, providing safe and secure communication, long range, and advanced power management mechanisms to extend the devices' operating time on a single battery.

The BE WAVE System is a family of unique wireless devices, bringing smart solutions to your home, performing home automation functions, protection against intruders, analysis of sensor readings and detection and response to events.

Application:	BE WAVE system
LAN port:	1 x Ethernet RJ45
Wireless:	ABAX2 : 868.0 MHz ... 868.6 MHz, WiFi : 2.4 GHz IEEE 802.11 b/g/n, 5 GHz IEEE 802.11 a/n, 4G LTE, 2G GSM
Radio communication range (at open area):	ABAX2 : < 2000 m
LED indicators:	System / Status
Events memory:	5000
Number of supported devices:	128
Number of users:	50
Memory card slot:	microSD - 32 GB included
SIM card slot:	2 x  ( Dual SIM )
Mobile phones support:	The BE WAVE free application on Android The BE WAVE free application on iOS
Main features:	Configuration using the BE WAVE application, Remote control and management, WiFi - local access Bi-directional encrypted radio communication : AES-128 Transmission channel diversity – automatic selection of the one of 4 channels that will enable transmission without interference with other signals in the 868 MHz frequency band Independent radio channel for image reception SMS/CLIP/PUSH personal messaging, Setting scenarios, Reporting events to two monitoring stations Supported formats: Contact ID IP, SIA IP Dual Path Reporting Communication via Ethernet network The built-in mobile phone module with 2 SIM slots (SMS, monitoring to the station, mobile application, PUSH messaging) - data transmission in 4G LTE / 2G GSM technology - depending on the capabilities of the cellular network Software update via network The "ECO" option allows to extend the battery life up to four times (only in ABAX2) Battery charging possible Battery voltage control Monitoring the status of the battery Low battery level alarm Possibility to mount to the wall Tamper protection (detection of removing from mounting surface and enclosure opening) Power cord - included
Housing:	Plastic
Color:	White
Environmental class EN 50130-5:	II
Power supply:	230 V AC @ 50 Hz, 18650 battery Li-Ion 3.6 V / 3200 mAh - Emergency Power Supply
Power consumption:	max. 2.8 W (operation) 1.85 W (Standby mode)
Battery lifetime:	≤ 8 years - ECO mode
Operation temp:	-10 °C ... 55 °C
Permissible relative humidity:	max. 93 % ± 3 %
Weight:	0.328 kg
Dimensions:	158  x 158  x 30 mm
Manufacturer / Brand:	SATEL
Guarantee:	2 years